Bright 1060 Embossed Aluminium Alloy Sheet / Aluminum Checkered Plate 3003 H14
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
1060 aluminum High quality embossed aluminium alloy sheet/aluminum checkered plate 3003 h14<
1060 aluminum High quality embossed aluminium alloy sheet/aluminum checkered plate 3003 h14
-
Specifications
1) Alloy: 1050, 1060, 1100, 3003, 3004, 3005, 3105, 5005, 5052, 5083, 5754
2) Temper: Various status
3) Thickness: 0.2-1.6mm -
4) Width: 910-1600mm
-
5) Length: Under9500mm/ Coil
6) Weight: 2.5-5.0 tons per coil
7) Dimensions and weight can be produced according to clients' specifications.
8) Inner Diameter: 505mm, 605mm
9)Surface: Bright -
Coating details:
1) Coating finish: PVDF, POLYESTER, ACRYLIC
2) Gloss: Meet the customer requirement
3) Total coating thickness:
PVDF coating: More than 25 micron
Polyester coating: More than 18 micron4) Coating hardness (pencil hardness) more than 2H
5) coating adhesive: No lower than1st grade
6) Impact resistance: No cracking or peeling (50kg/cm, ASTMD-2794: 1993)
7) Flexibility (T-bend): 2T
8) MEK resistance: More than 100
9)Bottom side aluminum sheet is coated with protective polyester material, thickness more than 6 micron
10) Outer packing; Export standard, wooden pallet.
-
Applications
1) Air condition
2) Refrigerators
3) Roofing -
Packing
1) Each coil to be securely tied with three bandings.
2) The contact points of these bandings on the coil edge to be protect with edge protectors.
3) Coil then to be properly wrapped with plastic film, woven belt, resistant paper.
4) Wooden or iron pallet can be used or as your requirements
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | Impurity | Al |
| 2014 | 0.5-1.2 | 0.7 | 3.9-5.0 | 0.4-1.2 | 0.2-0.8 | 0.1 | 0.25 | 0.15 | - | 0.15 | Rest |
| 2017 | 0.2-0.8 | 0.7 | 3.5-4.5 | 0.4-1.0 | 0.4-0.8 | 0.1 | 0.25 | 0.15 | - | 0.15 | Rest |
| 2024 | 0.5 | 0.5 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | - | 0.15 | Rest |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | - | - | 0.15 | Rest |
| 5056 | 0.3 | 0.4 | 0.1 | 0.05-0.20 | 4.5-5.6 | 0.05-0.20 | 0.1 | - | - | 0.15 | Rest |
| 5083 | 0.4 | 0.4 | 0.1 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | 0.25 | 0.15 | - | 0.15 | Rest |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | 0.2 | 0.15 | - | 0.15 | Rest |
| 6061 | 0.4-0.8 | 0.70 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | - | 0.15 | Rest |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | - | 0.15 | Rest |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | 0.2 | 0.1 | - | 0.15 | Rest |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | 5.7-6.7 | 0.06 | 0.08-0.15 | 0.15 | Rest |
| 7075 | 0.4 | 0.5 |
